Products

EMCO Chemical Distributors is an authorized distributor of Cortec Corporation.

For samples, technical data sheets (TDS), safety data sheets (SDS) or general questions, please contact a specialty chemical representative.

l

Request a Quote

Request a Sample

Call Us: 262-427-0400

Email: info@emcochem.com

CORTEC CORPORATION

Cortec® Corporation is committed to providing world class corrosion solutions for industries across the globe. As the global leader in innovative, environmentally responsible VpCI® and MCI® corrosion control technologies, Cortec® seeks to deliver cost-effective, user-friendly integrated solutions for corrosion problems in packaging, metalworking, construction, electronics, oil and gas, and many other industries
NameSummaryDetails
Cortec M-109

Is a liquid vapor phase and contact corrosion inhibitor package for solvent-based paints and coatings Specifically, Cortec M-109 protects carbon steel, stainless steel, galvanized steel, aluminum, brass, copper, and bronze.

Show details
Cortec M-110

Is a long-term corrosion inhibitor package that provides multi-metal protection in contact phase for solvent-based coatings and some water-based coatings. Cortec M-110 can be post-added to most coatings.

Show details
Cortec M-118

Contact and vapor corrosion inhibitor with a blend of additives to provide a synergistic corrosion protection for ferrous and aluminum substrates.waterborne coatings.

Show details
Cortec M-119 LV

Is a water based corrosion inhibitor for use in water based epoxies, urethanes, acrylics and alkyds. M-119 LV provides protection for carbon steel and aluminum, eliminates in-can corrosion and reduces scribe creep. M-119 LV does not contain any heavy metals such as zinc phosphate, chromates or barium.

Show details
Cortec M-138

Is a VpCI® corrosion inhibitor additive for rubber and sealants. It can be used to protect metal parts in contact with or in close proximity to rubber rollers, gaskets, or manufactured parts. M-138 replaces the use of environmentally unfriendly coatings or expensive alloys in addressing the tendency of elastomers

Show details
Cortec M-235

Is a proven corrosion inhibitor for copper, copper-based alloys and other yellow metals. M-235 functions by reacting with surface copper oxides to form a strong, insoluble polymeric complex. This complex creates a thin layer or film on metal surfaces that provides both a mechanical and electrochemical

Show details
Cortec M-236

Is a liquid corrosion inhibitor for copper, aluminum and steel. It is especially designed to prevent corrosion of copper in power transformers during extreme heat. M-236 is an easy to use liquid that readily mixes with a variety of oils and other solvent blends.

Show details
Cortec M-240

Is a liquid vapor phase and contact corrosion inhibitor package for water-based paints and coatings, and plastics and elastomers. Specifically, Cortec M-240 provides flash corrosion protection for carbon steel, stainless steel, galvanized steel, aluminum, brass, copper, and bronze. Cortec M-240 is soluble in water.

Show details
Cortec M-241

Is an inhibitor for protection of aluminum and it’s alloys from “in can” corrosion and also waterbased coolants, process and metal working fluids, and more. This product may be introduced to formulations at virtually any step of production. M-241 does not contain toxic components and has FDA approval (21 CFR part 172).

Show details
Cortec M-250

Is an anticorrosion additive to soluble oils, which is designed for use with a variety of naphtenic oil-based formulations. M-250 contains emulsifiers which allow this product to support stability of water emulsion (when added to the ready to use emulsion) or to add some emulsification properties to the soluble oil (concentrate).

Show details
Cortec M-251

Is an environmentally friendly , low foaming water soluble corrosion inhibiting additive for synthetic cutting fluids. It provides corrosion protection to carbon steel, copper, galvanized steel, and other ferrous and non-ferrous metals and their alloys. M-251 provides both contact and vapor phases corrosion potection during and after operation.

Show details
Cortec M-369

Is an oil and wax compatible anticorrosion additive. M-369 added to oils and waxes will form a self-healing and moisture-displacing barrier film. This film provides superior protection against aggressive corrosive environments.

Show details
Cortec M-370

Is a multimetal, corrosion preventive additive for water-based metalworking fluids, lubricants, cleaners and coatings during product manufacturing. This water-based additive utilizes VCI technology for maximum protection. Application: Coolants Primer

Show details
Cortec M-370 A

Is a water-based additive to alkaline fluids and is specially formulated to protect aluminum. Solutions containing M-370 A remain stable and clear. This additive does not contain nitrites, phosphates, silicates or chromates and is based on Cortec’s VpCI (Vapor Corrosion Inhibitor) technology.

Show details
Cortec M-370 C

Is a multimetal, corrosion preventive additive for water-based metalworking fluids, lubricants, cleaners and coatings during product manufacturing. This water-based additive utilizes VCI technology for maximum protection.

Show details
Cortec M-370 NS

Is a multimetal, corrosion preventive additive for water-based metalworking fluids, lubricants, cleaners and coatings during product manufacturing. This water-based additive utilizes VCI technology for maximum protection. The NS versionis surfactant free.

Show details
Cortec M-380

Is a water-based corrosion inhibitor that is designed to be used with carboxylated acrylic or styrene-acrylic latices. M-380 provides corrosion inhibition to ferrous and non-ferrous surfaces. M-380 should be mixed before use although no settling is anticipated. The recommended starting levels for M-380 should be 1% to 3% based on the total weight of the formulation.

Show details
Cortec M-381

Is a water-based corrosion inhibitor additive designed for waterborne coatings or compounds.381 should be used with carboxylated acrylic or styrene-acrylic latices. No ammonia is present in this additive.

Show details
Cortec M-408

Is a corrosion inhibitor for brake fluid. It is compatible with DOT 3, 4, and 5 brake fluids, but is especially effective in silicon based brake fluids, such as DOT 5. M-408 dramatically improves corrosion protection of brake systems and does not adversely affect other properties of DOT-5 brake fluid, including flammability, high and low temperature serviceability, dry and wet boiling points, and compressibility. M-408 is very economical. When added to DOT-5 brake fluid, at a concentration level of 1-1.5% by weight, it provides corrosion protection for ferrous and yellow metals in conditions of high humidity and elevated temperatures.

Show details
Cortec M-415

VpCI-additive, provides excellent VpCI® protection for solvent and oil-based systems.

Show details
Cortec M-435

Vapor corrosion inhibiting additive: offers flash rust protection for solvent-based and waterborne coatings.

Show details
Cortec M-5120

Water-based additive for heat-seal coatings that protects ferrous and non-ferrous metals. Can be added to water-based skin film primers and other coatings.

Show details
Cortec M-528

M-528/528L are the additives for hydraulic fluids used in subsea production control systems. They provide corrosion protection for steel, copper, brass, aluminum, bronze, galvanized steel, and other ferrous and non-ferrous metals and their alloys. M-528/528L prevent corrosion in both phases: contact and vapor.

Show details
Cortec M-529

Is an oil-based package of corrosion inhibitors for lubricating, hydraulic oils or engine oils.

Show details
Cortec M-530

Is an oil-based package of corrosion inhibitors for hydraulic or lubricating oils. M-530 is a rust preventive, which provides excellent protection during operating conditions and intermittent operation. M-530 is very effective for mineral and synthetic oils: napthenic, iso-paraffinic, PAOs, etc.

Show details
Cortec M-531

Is an oil-based package of corrosion inhibitors for petroleum and synthetic lubricants. M-531 provides outstanding vapor and contact corrosion protection with excellent demulsibility. M-531 is effective in a variety of conventional and synthetic base stocks.

Show details
Cortec M-531-T

Is an oil-based package of ash free corrosion inhibitors for petroleum and synthetic lubricants. M-531 T provides outstanding non-staining properties with excellent demulsibility and filterability.

Show details
Cortec M-533FG

Is a premium rust inhibitor for petroleum and synthetic lubricants, greases, and rust preventative fluids. It provides excellent demulsibility and filterability and is compatible with a wide range of additives and base stocks. Being NSF HX-1 certified, M-533 FG is permitted for use in food plants where incidental contact with food is expected.

Show details
Cortec M-5365

Solvent-based additive for solvent-based paints.

Show details
Cortec M-540

Is a premium quality additive formulated with proprietary technology to provide superior corrosion protection in bio-based and ester-based greases.

Show details
Cortec M-605

designed specifically as deicing additives to prevent corrosion due to chlorides. M-605 and M-605 L provide protection to ferrous metals.

Show details
Cortec M-605 PS

Protects both ferrous and aluminum-based alloys.

Show details
Cortec M-605L

Is a corrosion inhibitor designed specifically as deicing additives to prevent corrosion due to chlorides. M-605 and M-605 L provide protection to ferrous metals.

Show details
Cortec M-640

Is an additive to antifreeze/coolant fluids to replace nitrites, phosphates, amines and other types of restricted corrosion inhibitors. The final concentration range for M-640 under operating conditions is 0.5-0.8% by weight.

Show details
Cortec M-640 L

Is a corrosion inhibiting additive for water and ethylene glycol-based engine heat exchange fluids.

Show details
Cortec M-645

Is a newly developed corrosion inhibitor additive for corrosion induced by seawater or brine. M-645 is a highly surface active concentrate, which will displace water containing chlorides from the metal surface, is then adsorbed forming an oily protective film on the metal. This film is the most uniform when it is applied in conjunction with an oxygen scavenger.

Show details
Cortec M-95

is a very low foaming, water soluble corrosion inhibitor additive. It provides corrosion protection for steel, copper, brass, magnesium, aluminum, bronze, galvanized steel, and other ferrous and non-ferrous metals and their alloys. M-95 prevents corrosion in both phases: contact and vapor. • Stable in aqueous systems at pH of 6 or above • Virtually non-foaming • Effective at low use levels (0.25-1.0%) • Soluble in water, glycols and alcohols; insoluble in hydrocarbon-based solvents; dispersible in oils • Non-phenolic • Not based on triazole compounds • Hard water stable • Nitrite and phosphate free

Show details
Cortec M238

Is a solvent-based blend of contact and vapor phase inhibitors designed as an additive to aromatic, paraffinic, naphthenic, fluorocarbon and hydrocarbon-based products. It provides multimetal protection during operating and idle conditions.

Show details
Cortec M320

Is an additive for rust preventive, lubricating or hydraulic oils. M-320 provides excellent contact corrosion protection. In addition to this film barrier, M-320 releases vapor phase corrosion inhibitors into the air above the oil. These VCIs attach to metal surfaces for additional corrosion protection.

Show details
Cortec S11

S-11/S-11 Org are corrosion inhibitors for aqueous systems with low pH levels. S-11 is a proprietary blend of acetylenic alcohols, salts of quaternary amines, and nonionic surfactants. S-11 Org is a proprietary blend of salts of alkyl pyridines.

Show details
CortecM-119

Contact and vapor corrosion inhibiting additive for aluminum and ferrous metals: offers good protection in a salt environment. Post add to coating with slow mixing. A 3/1 ratio of M-380/M-119 provides for a synergistic additive blend. These additives must be added separately to the coating.

Show details
CortecM-168

Contact and vapor phase inhibitor; multimetal protection for solvent based coatings. Coatings become softer at high levels of this additive

Show details
CortecM-370 HS

Is a multimetal, corrosion preventive additive for water-based metalworking fluids, lubricants, cleaners and coatings during product manufacturing. This water-based additive utilizes VpCI technology for maximum protection. M-370 HS is a high surfactant version for providing a source of a compatible surfactant with levels high enough to clean.

Show details
CortecM-370 NS

Is a multimetal, corrosion preventive additive for water-based metalworking fluids, lubricants, cleaners and coatings during product manufacturing. This water-based additive utilizes VpCI technology for maximum protection. M-370 NS is a surfactant-free version, which helps in some detergent formulations.

Show details
Flashcorr VpCI

Is a highly effective, non-toxic, environmentally safe cleaner that removes and neutralizes even the harshest of salt build-up from any metal surface.FlashCorr VpCI represents an environmental and economic breakthrough in corrosion prevention. FlashCorr VpCI enables superior protection of metal surfaces

Show details
S-111Show details
S-8Show details

8601 – 95th Street, Pleasant Prairie, WI 53158 - (P) 262-427-0400 (F): 262-947-0075

© 2019 EMCO Chemical Distributors, Inc. All rights reserved.

Terms and Conditions | Privacy Policy

Designed by Windy City Web Designs | Strategies