Economical synthetic oil rated to 550ºF (288ºC) with very high resistance to oxidation as well as high resistance to sludge and fouling

High flash point of 445ºF (229ºC) that meets Coast Guard Marine requirements.

Heat/cool from –80ºF to 500ºF (-60ºC to 260ºC); non-toxic, odorless and food contact rated; High heat transfer for increased output.

Premium thermal oil for use up to 600ºF (315ºC) that has a long life, is non-toxic and odorless; food contact rated, NSF (HT1) FDA.

Non-toxic, high purity, premium fluid that features superior economy

Superior economy. Non-toxic, high purity, premium fluid.

A one step, non-hazardous, non-toxic, cleaning agent for systems with fouling and other fluid degradation issues. It restores heat transfer and removes degraded material without the need to stop production. The removal of carbon and sludge is achieved by adding 15% of the system volume and running for up to one week. Xceltherm®CLX Cleaner has a top end working temperature of 550°F.

Hot running solvent for synthetic oil high temp systems; compatible with Dowtherm® A and most other synthetic heat transfer fluids.

Liquid phase to 630ºF (330ºC); odorless high temperature synthetic with an economical price for use over 600ºF; no vapor pressure at rated temperatures.

Hot running flush fluid for thermal oil systems that allows system flushing while running production; compatible with most heat transfer fluids

Liquid or vapor phase to 700ºF (370ºC); biphenyl-free, non-hazardous alternative for high temp fluids with liquid or vapor phase to 700ºF (370ºC).

Liquid or vapor phase to 750ºF (400ºC); chemical equivalent to DOWTHERM® A.*

High operating temperature of 700°F (370°C) at low pressure; liquid phase heat transfer fluid for demanding applications.

Silicon based for high thermal stability and oxidative resistance at high operating temperatures of up to 750°F (400°C) with a low start-up temperature of under -40°F (-40°C).

“Super” cleaning agent for systems requiring quick removal of heavily degraded fluid that has caused excessive carbon and sludge. This low temperature cleaning process leaves the system with a bare metal finish on internal piping in only one day. Simply drain, flush, and refill the system to return it to full efficiency.

High efficiency heating/cooling fluid with -70ºF to 650ºF range (-55ºC to 345ºC); liquid or vapor phase, 527ºF (275ºC) IPB.

High flash point of greater than 410°F (210°C) as measured by Pensky-Martens Closed Cup method (ASTM D93), petroleum based, non-toxic for use up to 600°F (315°C).