Crosslinker adhesion promoter

a thiocarboxylate functional silane adhesion promoter. It has low odor, low volatility and low mercapto reactivity until the thiocarboxylate is activated during application of the adhesive or sealant.

Silicone antifoam can help provide maximum foam control in many types of industrial applications, from chemical processing to food processing. With advanced defoamer technology, the 100% silicone compound offers improved efficiency and longevity over other silicone antifoam compounds

Super wetting NON FOAMING agent for coatings enables wetting of waterborne systems on common and hard-to-wet substrates. The product’s nonfoaming characteristics and superwetting properties make it an excellent candidate to consider for coatings applied by spray or high-speed roll methods

CoatOSil 1220 surfactant is a non-fluorine based organomodified siloxane surfactant with the unique superwetting properties in waterborne coatings for spray applications, high-speed roll applications and hard-to-wet surfaces. It can also improve flow and leveling properties, while remaining stable in aqueous formulations having pH 6-11

Surfactant is a non-fluorine based organomodified siloxane surfactant with the unique superwetting properties in waterborne coatings for spray applications, high-speed roll applications and hard-to-wet surfaces. It can also improve flow and leveling properties, while remaining stable in aqueous formulations having pH 6-8.

Resin Binder for Anticorrosive, High Heat-resistant, Weatherable Coatings.

silane monomer designed as a crosslinker for 100% acrylic latexes. This silane is easily incorporated into acrylic latex backbones

silane can be considered for both one- and two-part systems. When formulated, it can typically be added directly to latex, or pre-emulsified before addition. In one-part formulations incorporating CoatOSil 1770 silane, tests have shown formulation stability for over 18 months

silicone emulsion is a solvent-free, formulated without APEO water-based emulsion of an amino functional siloxane formulated without alkylphenol

This NON Yellowing epoxy functional silane provides enhances the physical properties of water-borne dispersion polymers, such as polyurethane and acrylic latexes, CoatOSil 2287 silane enables the formulation of coatings with good shelf stability, improved wet adhesion and enhanced resistance to water and organic solvents.

Linear silicon. Acts as a slip control agent, scratch/mar resistant and defoamer. It has high silicon content. The polyether type is EO. It is suitable for waterborne & solvent borne coatings and inks

2816 coating additives offers varying degrees of slip performance benefits in coatings for wood, leather goods, industrial and auto refinishing, as well as overprint varnishes and inks

CoatOSil 3500 coatings additive provides an excellent balance of properties in radiation cure coatings. It reduces coefficient of friction (COF) in acrylate based coatings, without generating foam or reducing gloss. This is possible because of its compatibility in formulated coatings.

3501 coatings additive is Momentive’s most powerful friction reducing agent, providing the maximum in coefficient of friction (COF) reduction for radiation-cured formulations in its portfolio of coatings additives.

In solvent-borne coating systems, CoatOSil 3505 coatings additive generally acts as a good flow, leveling, and air release agent. CoatOSil 3505 coatings additive has shown good slip, gloss retention and mar resistance in various solvent-borne formulations. CoatOSil 3505 coatings additive can also be considered in UV and EB cure systems.

coatings additive is a reactive 100% active slip agent that may help improve abrasion and mar resistance in UV and E Beam cured acrylate resins. Additional benefits include enhanced flow and leveling, substrate wetting and gloss retention.

coatings additive consists of a silicone backbone with all polyethylene-oxide (EO) polyether. Its large proportion of silicone has shown excellent defoaming performance in solvent-borne coatings and inks as well as radiation-cured formulations

copolymer is an excellent candidate as a flow and leveling additive to acrylic-polyol resin monocoat and clearcoat formulations

excellent candidate in acrylics for optimal flow and levelling

copolymer is a silicone-polyether block copolymer that can help provide excellent flow and leveling in a variety of solvent borne and coil coating applications. It is an excellent candidate for coil coatings such as pre-painted metal applications

coatings additive is a silicone copolymer with a pendant structure and polypropylene oxide (PO) side chains. The all PO side chain helps minimize the potential for foam stabilization, making CoatOSil 7510 coatings additive an excellent candidate as a defoamer in water-borne industrial or decorative coating formulations

coatings additive is a silicone polyether copolymer with a pendant structure. It has been incorporated as a wetting agent or co-emulsifier in industrial and decorative water-based coatings

coatings additive is a silicone copolymer with a polyethylene-oxide (EO) pendant side chain. The silicone portion of the molecule can help provide benefits such as good mar resistance and antiblock capabilities. The EO component enables ideal compatibility with water-borne coatings and inks.

coatings additive is a silicone copolymer with a pendant ethylene oxide side chain that can enable excellent wetting and recoatability in water-borne coatings and inks.

additive consists of a silicone backbone with all polyethylene-oxide (EO) polyether. The specific molecular architecture of CoatOSil 7605 coatings additive yields a low melting wax, differentiating it from most other CoatOSil brand copolymers and consequently making it an excellent candidate to consider as a flow leveling and wetting agent in powder coating formulations

coatings additive can help to greatly lower aqueous surface tension, thus promoting wetting in water-based coating systems. While generally considered for use in aqueous systems, trisiloxanes like CoatOSil 7608 coatings additive, have also found utility as flow and leveling agents in solvent-based coating systems

Silicon-polyether block copolymer. Acts as flow/levelling agent, slip control agent and scratch/mar resistant agent. It has pendant molecular architecture. The polyether type is EO. It is suitable for waterborne & solventborne coatings and inks.

nonionic, organomodified trisiloxane surfactant to consider for the formulation of numerous coating systems. This molecule is often called a ‘super spreader’, because it has unique wetting and spreading properties when included in water-borne coatings and inks.

is a cycloaliphatic epoxy – modified silicone emulsion useful in a broad range of applications to promote water repellency and lubricity to a variety of substrates. It has been designed to be further diluted in water and applied directly to fibers, fabrics or porous materials.

CoatOSil DRI waterborne silicone has been shown to improve hydrophobicity and elongation properties

a silicone micro resin. Acts as a lubricant and water repellant. Possesses lower specific gravity than inorganic fine powder. Exhibits superior heat and chemical resistance.

friction modifier is a silicone-based resin that can be used as an additive to coatings for the improvement of performance as well as provision of a variety of slip and soft touch characteristics.

Polysiloxane Resin Modifier for Silane/Polysiloxane containing coatings, including hybrids. Improves coatign flexibility, gloss retention under harsh weathering conditions.

can help to greatly lower aqueous surface tension, thus promoting wetting in water-based coating systems. While generally considered for use in aqueous systems, trisiloxanes like CoatOSil 7608 coatings additive, have also found utility as flow and leveling agents in solvent-based coating systems.

promotes adhesion in a broad range of applications via multiple epoxy and silane groups on each oligomer chain. Its gamma-gylcidoxy propyl epoxide ring reacts with many organic groups while its alkoxy silane groups promote adhesion to inorganic substrates.

is a medium-hard phenylmethyl silicone resin in solvent that can be used as a binder for anticorrosion coatings with thermal stability up to 600C. The main fields of application are the coating of machine components, fire doors, engine manifolds, car exhaust silencers, drying units etc. These commonly use one-coat finishes.

a 100% active mercapto silane useful as a crosslinker and adhesion promoter for coating, adhesive and sealant applications. Its area of primary utility is in polyurethane based systems, but it may also find use in epoxy, acrylate and hybrid coatings

heat-resistant paint and industrial, marine and protective coatings

heat-resistant paint and industrial, marine and protective coatings

heat-resistant paint and industrial, marine and protective coatings

heat-resistant paint and industrial, marine and protective coatings

heat-resistant paint and industrial, marine and protective coatings

heat-resistant paint and industrial, marine and protective coatings

heat-resistant paint and industrial, marine and protective coatings

heat-resistant paint and industrial, marine and protective coatings

heat-resistant paint and industrial, marine and protective coatings

methylhydrogen silicone fluid

e-free 189 silane is the latest advancement in silanes for mineral coupling with all-around excellence in performance and significant improvements in processing, allowing for potentially reduced manufacturing costs. Developed for use in the manufacturing of industrial rubber and other applications, its physical properties also can increase abrasion resistance gains and outstanding reinforcement index. Even at reduced use levels, e-free 189 silane typically features easier mixing, faster processing time and quicker curing cycles—all resulting in higher throughput. This silane can also be mixed at a higher temperature without an increase in viscosity or the risk of scorching.

Standard PDMS fluid

Standard PDMS fluid

Standard PDMS fluid

Standard PDMS fluid

Standard PDMS fluid

Standard PDMS fluid

Standard PDMS fluid

Standard PDMS fluid

Standard PDMS fluid

Standard PDMS fluid

Standard PDMS fluid

Standard PDMS fluid

Standard PDMS fluid

Standard PDMS fluid

Standard PDMS fluid

Standard PDMS fluid

Standard PDMS fluid

Standard PDMS fluid

Standard PDMS fluid

Baysilone Emulsion F is mainly used as a water repellent for core insulation boards and spun-glass mats. For these purposes the emulsion should be diluted to approximately 2% silicone content with tap water. This happens together with the preparation of the binder, comprising urea/melamine formaldehyde resins.

As a 100% active silicone polymer modified with fluoro-containing groups, FF160 fluorosilicone can provide exceptional foam control and long-lasting antifoam effects across a variety of oil and gas applications. Use of this fluorosilicone can help impart foam control at very low treat rates, as well as in situations in which there are few cost-effective alternatives. With resistance to chemicals and oxidation, FF160 fluorosilicone may be able to be used in extreme temperatures and in environments of high chemical reactivity

FF170 fluorosilicone is a 100% active silicone polymer modified with fluoro-containing groups and is an excellent candidate to consider for difficult nonaqueous foam systems. The benefits of silicone and fluorocarbon chemistries come together in FF170 to help provide long-lasting foam control in a variety of systems. It can be particularly effective in those found with petroleum stocks in high-pressure separators. Conventional antifoams (e.g., those based on polydimethylsiloxanes) are usually soluble and may actually cause foam stabilization rather than foam control. The chemical, petroleum and dry-cleaning industries can benefit from a more potent foam-control agent, such as that found in FF170 fluorosilicone.

Formasil* 433 is an organomodified silicone for spreading oils in a variety of polish applications. Application degreasers, floor/carpet care, food & dairy plant cleaning, hard surface cleaner, fabric softener

Silicone Emulsion is an extremely stable, water-thin emulsion of methyl silicone oil that is replacing organic oils as a spray lubricant in the glass-container industry. It is being used successfully for the lubrication of all types of delivery equipment as well as for spraying the blank moulds of glass-forming machinery.

additive is a water-dispersible alkyl amino, polyalkyleneoxide modified silicone terpolymer. It is an excellent candidate for easy formulation and compatible with commonly used ingredients and to provide release, gloss, and a good feel to surfaces including glass, rubber, ceramic, fabric

Indusil 139 silicone is an aqueous solution of a silicone polymer modified with organic groups. At temperatures below its cloud point, it is completely soluble in water forming a clear, yellow solution. It possesses a dual functionality: at temperatures below its cloud point it typically stabilizes emulsions and latexes but at temperatures higher than its cloud point it destabilizes them. As such, Indusil 139 silicone is different from typical polydimethylsiloxanes (PDMS) which are not water soluble and which require emulsifiers to produce milky-white emulsions.

Indusil ESS 110 silicone is a low molecular weight, low viscosity polysiloxane modified with an organic group, enablingcompatibility with various solvents and resins.

Grey powder used to control foam in concrete and construction applications

an emulsion of silicone material for use as a component in water-based polyurethane mold release formulations.

a silicate material for use as a component in polyurethane mold release formulations.

Is am emulsion of an organomodified silicone oil. the organic functionalization of the silicone backbone makes it an excellent candidate to consider for industrial applications that need high thermal stability, excellent compatibility with other organic components, superior release characteristics especially for rubber, foam control and excellent spreading and wetting characteristics. Once applied, LE 410 silicone emulsion imparts water resistance and is re-paintable and re-coat able. FDA food contact.

silicone emulsion is an emulsion of an organomodified silicone oil

a non-ionic dimethyl silicone fluid emulsion. It is an extremely stable, water-thinned emulsion

Vinyl Functionality
• Vinyl functionality allows free radical addition to polymers.
• Vinyl functionality increases the rate of silane hydrolysis.
Triethoxy Silane Functionality
• Bonds to inorganic substrates to provide excellent wet and dry adhesion.
• Fast hydrolysis rate.
• Functions as a crosslinker.

cycloaliphatic epoxy – modified silicone emulsion useful in a broad range of applications to promote water repellency and lubricity to a variety of substrates.

Textile Softener A self-crosslinkable silicone emulsion of an amino functional silicone polymer, Magnasoft 2059 textile softener is generally an excellent candidate for lubricating and softening the fibers and threads

With careful selection from the more than 130 products in the Magnasoft portfolio, textile and leather makers can add just the right mix of value-adding properties to their end products, and they can do so cost-efficiently. Explore the Magnasoft product family to discover the right solution for your textile processing needs.

providing a voluminous, silky feel to nearly all fabric types, Magnasoft Derma NT textile enhancer typically brings out the true softness in fabrics at lower use levels than other products. This textile auxiliary agent has been formulated to generally help fabrics stay their best, even after several home laundry cycles. This is accomplished by using technology that combines several chemical entities into a single, linear molecule. Versatile and easy to use, Magnasoft Derma NT textile enhancer can be applied as a spray or as an exhaust application.

Hydrophilic Textile Softener is a nonionic, water-soluble, polyoxyalkylene-modified reactive silicone, that is an excellent candidate to consider as a hydrophilic softener and lubricant for fibers and fabrics, such as polyester, polypropylene, nylon, cotton, polyester/cotton, cellulose, wool, rayon, acrylics, and a wide range of other synthetic and natural fibers

is an easy-to-use, efficient, hydrophilic silicone textile softener that can provide superior softness with little yellowing

hydrophilic softener is a novel epoxy polyether terpolymer that provides hydrophilicity and a soft full hand when applied to a variety of knit and woven fabrics

Hydrophilic Textile Enhancer. SUPERIOR SOFTNESS, UNCOMPROMISING STABILITY. Featuring outstanding stability, Magnasoft JSS hydrophilic textile enhancer generally performs well under demanding alkaline conditions and high temperatures – conditions in which conventional amino silicone emulsions tend to separate and develop silicone spots.

water repellent finishes are specialty silicone emulsions that may be co-applied during the finishing-bath process. Specialized equipment is not generally required to dry/cure this product system.

Magnasoft NFR-A / Magnasoft NFR-B, a two-component water-repellent system, is the latest product offering from Momentive Performance Materials for the textiles industry. It is an excellent candidate to consider for top-of-the range water repellency

Momentive Performance Materials Performance Whiteness The following are examples of the superior low-yellowing performance of Magnasoft Plus textile softener fluid relative to competitive amino silicones on 100% cotton print cloth, 65/35 = polyester/cotton, 100% rayon and 100% cotton knit fabrics

SUPERIOR SOFTNESS, NO YELLOWING Able to achieve a soft, silky feel with a hydrophilic finish to all fabric types, Magnasoft Prime textile softener, generally, provides durable, lasting performance at lower use levels than comparable products

is a linear, non-reactive, high molecular weight quaternary aminosilicone polymer

typically provides a fullness and superior softness to a variety of fabrics including cotton, synthetics, cotton/synthetic blends and wrinkle-free garments. It is generally very low yellowing, compared to conventional aminosilicones, and holds up through numerous detergent washes

typically adds a premium soft, full hand feel to a wide variety of fabrics, including cotton, synthetics and cotton/synthetic blends. It may be a particularly ideal candidate for fabrics treated with soil-release additives, where it generally has little to no interference with soil-release properties, as well as wrinkle-free garments treated with durable press resins.

textile enhancer is a 100% actives linear silicone copolymer with high molecular weight, yet manageable viscosity, developed and patented by Momentive Performance Materials to deliver excellent aesthetics, hydrophilicity and processability.

nonionic, making it compatible with a multitude of other formulating components. It also may improve the tear strength and flex abrasion properties

textile softener can provide a silky, luxurious feel for hydrophobic fabrics such as polyester and acrylic

textile softener generally works to boost molecule weight with its reactive end-groups, which, in the presence of moisture, chemically bond with a variety of surfaces. Magnasoft 310 textile softener is typically easy to emulsify, yielding stable micro-emulsions to provide durable softness to nearly any fabric

heat and water resistant

heat and water resistant

heat and water resistant

10% actives, silicone antifoam emulsion with excellent defoaming for tank-mix applications

a non-aqueous 100 percent active antifoam that covers the range of food processing from frying to jelly/jam/sauce manufacturing. The components in SAG 100 silicone antifoam meet the requirements of the U.S. EPA regulation 40 CFR 180.960, and are therefore exempt from tolerances in food when used as an inert ingredient in agricultural applications

a non-aqueous 100 percent active antifoam that covers the range of food processing from frying to jelly/jam/sauce manufacturing. The components in SAG 100 silicone antifoam meet the requirements of the U.S. EPA regulation 40 CFR 180.960, and are therefore exempt from tolerances in food when used as an inert ingredient in agricultural applications

concentrate contains 78% actives and can provide significantly enhanced performance in difficult foaming system

the “No Problem” foam control agent. Exceptionally easy to use, it displays superior dispersibility in both aqueous and non-aqueous foaming media

Antifoam Emulsion. 30% actives, silicone antifoam emulsion with excellent defoaming for tank-mix applications

Antifoam Compound. 100% actives, OMRI listed silicone antifoam compound for non-aqueous formulations SAG* 47 Antifoam Compound 100% actives, OMRI listed silicone antifoam compound for non-aqueous formulations

antifoam concentrate can help reduce fermentation processing costs by maintaining foam control with minimal impact on the overall yield. It typically requires dosage concentrations that are significantly lower than natural oils used to control foam with virtually no impact on the oxygen transfer rate in aerobic fermentations.

Remains pourable liquid at -7oC. A specific version of it can even be used at -40oC

silicone antifoam compound can be used in compliance with a variety of regulatory requirements, including the U.S. FDA regulations for yeast fermentation and sugar beet processing. It is Halal-certified, Kosher, produced under the supervision of the Islamic Food and Nutrition Council of America (IFANCA) in compliance with halal requirements and the laws of Koshereth.

antifoam emulsion is an aqueous system foam controller for use when very high standards of quality and purity are required.

antifoam emulsion is an excellent choice to consider for a variety of water-based foam issues in oil and gas, and for the amine units of gas sweetening plants, liquefied natural gas plants, fertilizer plants or refineries

an aqueous system foam controller that may be considered for use when very high standards of quality and purity are required. This very adaptable foam control agent can provide excellent quality and purity of a food processing agent

an aqueous system foam controller that may be considered for use when very high standards of quality and purity are required. This very adaptable foam control agent can provide excellent quality and purity of a food processing agent.

a non-traditional silicone antifoam that combines the quick knockdown of organic defoamers (Table 1) with the durability of silicone antifoams (Table 2), providing excellent foam control in protein- and starch-stabilized foams

that offers excellent foam control as well as excellent compatibility in a variety of in a variety of surfactant concentrates and foaming systems.

foam control agent has been developed to provide a clear premix in high-concentration scouring surfactant concentrates. Typically, these concentrates are based on alcohol ethoxylates such as C10-15 alcohols, with 4-6

silicone antifoam features rapid foam knockdown, and can provide superior foam control at both ambient and elevated temperatures

Phenyl fluid release agent

This moderately low viscosity (=50 cSt/25 °C, 77 °F) silicone fluid is the best lubricant of the silicone family.
It has high radiation stability gelling at 5 x 108 rads.

SF1154 fluid is an excellent choice to high temperature heat transfer applications or as a base fluid in high
temperature greases. In addition, its excellent electrical properties can make it useful as a dielectric coolant,
high temperature ultrasonic coupler, high temperature heat bath and oxide protector for solder baths.
Silicone fluids have been used for a number of years in environments subject to radiation of various types.
They have been used as a hydraulic fluid in nuclear power stations and on nuclear powered ships. They
have operated in Van Allen Belt environments and in laboratory and diagnostic apparatus. The effect of
radiation on silicones is a cross linking mechanism which gradually increases the viscosity of the fluid

Volatile silicone

Water soluble below 48°C – useful in cold and warm water formulations. Excellent leveling and surfactant characteristics, which are important in finishes for paints and coatings. Good lubricating and release characteristics, which provide molding production efficiency.

Volatile silicone

Skin Care
· Imparts a smooth, velvety, non-greasy feel
· Imparts a durable film
· Provides excellent emolliency
· Improves spreadability and rub-in
Hair Care
· Provides excellent wet and dry combing
· Improves softness
· Enhances shine
· Provides improved manageability and conditioning

Gloss, sheen and heat resistance in hair care applications. Non-oily emolliency and antiwhitening properties in antiperspirants. Soft smooth feel in skin care applications while acting as a water barrier. Detackification and emolliency in cosmetic products.

Detergent resistant. Fast cure. Durable.

Upgrades coatings surface characteristics. Low viscosity. Effective with high viscosity coatings. Solubility in a wide range of solvents

a 1 Part , Silicone, Non-oily emollience, Liquid used to Silicone fluid

is a white, C30-45 alkyl modified silicone wax with 60-70C melting point in a pastille form. It is designed as a multifunctional ingredient that may deliver thickening, structuring and compatibilizing benefits in skin, hair, personal hygiene and color cosmetics.

Water repellent & Hand feel modifier (Film-forming)

a clear, non-reactive amodimethicone. This product’s physical and chemical properties have been optimized to deliver maximum conditioning benefits for damaged hair.

clear silicone sealant

acts as an efficient thickener and detackifier. It is an elastomer dispersion. Offers smooth, silky and luxurious feel. Possesses non-greasy and hydrophobic. Provides elastic modulus stability with temperature

High viscosity silicone containing a combination of a linear silicone fluid, and a silicone resin which is soluble in the fluid. Improves impact strength even at low temperatures. Excellent electricals (non-conductive or excellent electrical insulation properties).

an aqueous emulsion based upon silane technology, is an excellent candidate to consider for outstanding water resistance as an admixture and/or penetrating sealer.

Polysiloxane Emulsion by Momentive Performance Materials is a low VOC, durable, water-borne, solvent-free polysiloxane. Acts as a masonry water repellent. Provides improved color retention and reduced chalking after weathering. Designed for primers, water-borne exterior and interior architectural paints.

May act as boosters for organic demulsifier formulations at low concentrations. Can help improve the clarity of the separated water; practically oil-free
water. Controlled speed of water separation. Reduced sludge, water wetting of solids.

silicone demulsifier is soluble in water at temperatures below 40°C. It is recommended that a 5-8 weight % solution

silicone demulsifier and antifoam is based on a modified polydimethylsiloxane that combines hydrophilic and oleophilic characteristics with high surface affinity to produce remarkable interfacial activity, resulting in efficient foam control. It can help to clean up water at treatment levels as low as 2%.

demulsifier, in particular, are CEFAS-registered with a Gold Standard and No Substitution Warning. Silbreak antifoam and demulsifier products may be considered for use in a wide variety of oil-and-gas-industry applications, including: Foam control in gas-oil separators

is a solution of high molecular weight polydimethylsiloxane in solvent that, when crosslinked, can provide a low-energy, low- modulus coating that releases a wide range of aggressive pressure-sensitive adhesives

SilForce SS4192C catalyst is a 50% solution of dibutyl tin diacetate in toluene. SS4192C will effect rapid crosslinking of the coated bath at elevated web temperatures.

SilForce SS4259C cure accelerator is an additive for the SS4191 release coating
system that promotes faster crosslinking at reduced temperature.

Wide temperature range performance, maintains good shear and tack properties at intermittent temperatures up to 550 oF. Adhesion to a wide variety of surfaces including low energy surfaces (silicones, fluoropolymers, polyolefines). Resistance to moisture, weathering (ozone, sunlight), chemical (acids, alkalis, oils, flux, reverse current stripping) and biological (fungus) attack. Minimum silicone residue on applied surfaces. Excellent lap shear and creep resistance.

Wide temperature range performance, maintains good shear and tack properties at intermittent temperatures up to 500 oF. Adhesion to a wide variety of surfaces including low energy surfaces (silicones, fluoropolymers, polyolefines). Resistance to moisture, weathering (ozone, sunlight), chemical (acids, alkalis, oils) and biological (fungus) attack. Excellent laminate shear forces despite differing coefficients of thermal expansion. Low tack at room temperature, becomes aggressively pressure sensitive at 93ºC (200ºF). Excellent peel and shear strength

an excellent candidate for use in a range of broad applications to provide superior bonds between inorganic substrates and organic polymers.

Formulated without protic and nonprotic solvents. Soluble in water. Does not contribute to color when aged in resin formulations. N-H reactivity without the strong basic characteristics of amino silanes. Longer pot life than amino silane in reactive phenolic, epoxy, urea-melamine or
polyurethane resin formulations.

is a glycidal epoxy functional silane that may find use as an adhesion promoter in SPUR+* prepolymers, epoxy, polysulfide, silicone systems for caulks, coatings, adhesives and sealants.

Silquest A-1871 silane is an epoxy functional silane that may be used as an adhesion
promoter in polysulfide, urethane, epoxy and acrylic caulks, sealants, adhesives and
coatings.

chemically bonds reinforcing minerals such as silica, clay, mica and talc to the polymer matrix. This silane is especially useful in sulfur-cured and metal oxide-cured elastomers. It can be used as a pretreatment on minerals or added at the time of compounding.

This silane is an amino-functional oligosiloxane. Acts as adhesion promoter. It provides multi amino functionality for improved adhesion especially under wet conditions. Has lower sealant viscosity to improve sealant application rate, lower sealant residual surface tack compared to typical amino silanes, reduced VOCs of the final formulation, reduced hazardous air pollutants (HAPs) emissions, reduced yellowing with outdoor exposure, improved elasticity and lower modulus of the cured sealant. It can improve the performance of moisture curable hybrid sealants, room temperature vulcanization (RTV) silicones, polyurethane sealants and adhesives.

Secondary phenyl amino group reacts with such resin systems as isocyanates, acrylates, epoxies, phenolics, and silicones. Methoxy silane ester for fast hydrolysis time. Aromatic amino group for increased stability of resins/silane bond at elevated temperature. Phenyl group for good resin wet out.

Can provide an excellent after feel on the skin when used in a hydroalcoholic hand sanitizing gels and hand sanitizing soaps which can often leave the skin feeling dry and irritated after repeated use. The polyether portion of the Silsoft 860 conditioning agent can provide excellent compatibility, solubility and clarity without having a negative impact on foam generation or quality.

Emulsion, possess a combination of both pendant amino and terminal alkyl groups on the silicone structure. This combination can enable formulators to provide enhanced thermal protection, smoothness, shine, softness and manageability for dry, heat-damaged or color-treated hair.

Silwet DA performance additives are FDA-regulated additives that improve the performance of brown stock pulp defoamers used in the manufacture of paper and paperboard for indirect food contact. They enhance the dispersion and efficiency of formulated defoamers and also act as defoamers above their cloud point.

performance additives are FDA-regulated dioxin-free additives that improve the dispersion and efficiency of brown stock pulp defoamers used in the manufacture of paper and paperboard for indirect food contact.

is a silicon-polyether block copolymer. Acts as a wetting agent and flow/leveling agent. It has pendant molecular architecture. The polyether type is EO/PO. It is suitable for waterborne & solventborne coatings and inks.

is a silicone-polyether block copolymer that can help provide excellent flow and leveling in a variety of solvent borne and coil coating applications. It is an excellent candidate for coil coatings such as pre-painted metal applications.

May be used to enhance hydrophilicity of fabrics & yarn

Component of spin finishes for polyester Flo

silicone polyether copolymers, 100% actives Silicone Emulsifiers

Good lubricity. Easy release. High-temperature stability of silicone fluid. Low volatility of silicone fluid. Chemically inert. Water dispersible.

Glass wool hydrophobization

Good lubricity. Easy release. High-temperature stability of silicone fluid. Low volatility of silicone fluid. Chemically inert. Water dispersible.

Readily dispersible in aqueous formulations. Improved body and feel in hair care products. Imparts emolliency and luxurious feel to skin care products

silicone polyether copolymers, 100% actives Silicone Emulsifier

a methyl hydrogen crosslinker for SS4191 system. Used in conjunction with SS4191A.

is a blend of silicone resin and cyclopentasiloxane. Acts as film former. Imparts excellent water repellency. It can be added directly to the oil phase of the formulation. SS4230 is suitable applications include protective skin products, sunscreen products, facial make-up, lotions and creams.

is a blend of silicone resin and 50 centistoke dimethicone fluid. Acts as film former. Imparts excellent water repellency