Products

EMCO Chemical Distributors is an authorized distributor of BASF

For samples, technical data sheets (TDS), safety data sheets (SDS) or general questions, please contact a specialty chemical representative.

l

Request a Quote

Request a Sample

Call Us: 262-427-0400

Email: info@emcochem.com

BASF

BASF Corporation is the largest affiliate of BASF SE and the second largest producer and marketer of chemicals and related products in North America. At BASF, we create chemistry for a sustainable future. We combine economic success with environmental protection and social responsibility.
NameSummaryDetails
1-Ethynyl-1-cyclohexanolShow details
1-MethylimidazoleShow details
1,2-PropylenediamineShow details
1,5-PentanediolShow details
2-(2-Aminoethoxy)ethanolShow details
2-Butyne-1,4-diol pureShow details
2-EthylhexylamineShow details
3-MethoxypropylamineShow details
APG 325 N

A nonionic alkyl polyglycoside surfactant that proivdes superior perfomrance by combining the formulation oease of typical nonionic with the foam characteristics as anionics. APG 325N provide excellent detergency and stability benefits in a variety of cleaning products. It exhibits superior wetting, dispersing, and interfacial tension reduction properties for increased soil removal, especially on hard surfaces.

Show details
BenzylamineShow details
ButylamineShow details
ButylethanolamineShow details
Dehydol 100

Is stable to water hardness, dilute acid and caustic solutions. It can be mixed in any ratio with all known nonionic, anionic, cationic and amphoteric surfactants.

Show details
Dehydol 100 Liquid 90%Show details
Dehydol LT

Oily soil removal

Show details
Dehypon GRA

Is a low foaming surfactant in granular form, offering the cleaning and spotting performance consumers associate with a traditional phosphate containing product in the New Phosphate Free format and the required “carry through” characteristics that provide excellent rinse aid performance in multifunctional Automatic Dish Detergent.

Show details
Dehypon LS 24

Low foaming fatty alcohol – EO/PO derivative used for detergents and cleaners in which foaming has to be kept to a minimum

Show details
Dehypon LS 36

is a low-foaming surfactant especially suited for detergents and cleaners for industrial use where foaming has to be kept to a minimum.

Show details
Dehypon LS 54

Is a Low-foaming fatty alcohol EO/PO derivative, Dehypon LS 54 is great for use in industrial application where low foam in necessary.

Show details
Dehypon LS 54/MBShow details
Dehypon LT 104

Low-foaming and high wetting power, excellent degreasing and emulsfication properties. Low-foaming surfactant. Great caustic stability; won’t yellow in direct contact with NaOH beads or formulated in high caustic formulations.

Show details
Dehypound Advanced

Synergistic surfactant blend with superior hard surface detergency, detergency compared to NPE or LAE types. Controlled foam, excellent formulation flexibility and eco-friendly products: listed on Safer Choice and EPA iner list.

Show details
Dehyquart CSP

Is a biodegradable cationic surfactant, ideal for vehicle polish, shine and protection for wax type formulations. Dehyquart CSP provides a quick and easy drying effect easily observed in wind tunnel installations; making vehicle surface more hydrophobic.

Show details
Demelan VPC

Thickener for acidic systems. Highly effective on mineral acids. It improves/lower processing time, as it mixes into solution up to 3 times faster. Compatible with all types of anionic, cationic and amphoteric surfactants.

Show details
Deriphat 160C

Is a unique, multi-functional amphoteric surfactant. It can function as a foamer, cleaning agent, corrosion inhibitor, and a hydrotrope. The isoelectric point is 2.4 to 4.2.

Show details
Di-(2-ethylhexyl)amineShow details
DibutylamineShow details
Dicyclohexylamine

Is used mainly to manufacture corrosion inhibitors, paper and textile additives and vulcanization accelerators. The numerous other applications of dicyclohexylamine include oil additives, plasticizers and dye precursors.

Show details
Diethylamine anhydrousShow details
DiethylethanolamineShow details
Diisopropanol-para-toluidineShow details
Diisopropanolamine 85%Show details
Diisopropanolamine 85%

Used as an emulsifying agent. Is an intermediate used in the production of dyes, lubrification oils, corrosion inhibitor, detergents and cutting fluids. It can neutralize pH, act as a buffer (stabilize pH), or add basicity (alkalinity) to a solution.

Show details
DIMETHYLAMINOPROPYLAMINEShow details
Dipropylamine

Is a secondary amine which belongs to the class of dialkylamines. It is a versatile intermediate with a variety of applications. Most important applications are found in the field of Agricultural Chemicals.

Show details
Disopnil FES 32

Is fatty alcohol polyglycol ether sulphate, Na-salt. Used as emulsifier for the manufacture of polymer dispersions used in adhesives.

Show details
Disponil FES 993

Is fatty alcohol polyglycol ether sulphate, sodium salt. Disponil® FES 993 is used as emulsifier for finely dispersed, carboxyl groups containing polymer dispersions.

Show details
Disponil A 1080

Is a 80 % liquid formulation showing a solidification point < 10 °C. Fatty alcohol ethoxylates with linear structur usually build liquid-crystalline phases in the concentration range between about 30 and 60 % surfactant. Above 60 % surfactant content these surfactant solutions are usually solid.

Show details
Disponil AFX 3070

Is a non-ionic high performance surfactant for use in a wide range of emulsion polymerization technology. Besides improved stabilization properties in aqueous based polymer recipes, Disponil AFX 3070 shows an excellent biodegradability behavior, depending on the test for biodegration

Show details
Disponil AFX 4030

Is a non-ionic high performance surfactant for use in a wide range of emulsion polymerization technology. Besides improved stabilization properties in aqueous based polymer recipes, DISPONIL AFX 4030 shows an excellent biodegradability behavior, depending on tests on biodegration

Show details
Disponil AFX 4070Show details
Disponil DB

Aqueous solution of alkyl polyglycosides based on a natural fatty alchohol C8-C16, free of preservatives, readilty biodegradable, and has a low toxicity profile. It has wetting, penetrating, and detergency properties which makes it suitable for various food/animal feed applications.

Show details
Disponil FES 27

Is a particularly effective primary emulsifier for use in emulsion polymerization

Show details
Disponil FES 77

Is fatty alcohol ether sulphate, sodium salt. Used as emulsifier for the manufacture of finely dispersed and electrolyte-stable emulsion polymers.

Show details
Disponil SLS 101 Special

Is a sodium lauryl. sulphate with a low salt content excelling by its. extremely good emulsifying and foaming properties. as well as by its good washing and cleansing. properties.

Show details
Disponil SLS 2010

Is a lauryl alcohol sulfate. It is an excellent emulsifying and solubilizing agent. Its main utility is in the emulsion polymerization of such monomers as vinyl chloride, styrene-butadiene, acrylics and styrene.

Show details
Ditridecylamine mixture of isomersShow details
Ethylene carbonate SShow details
Ethylenediamine pureShow details
Eumulgin O 2

Is an Oleth-2 polymer that can be universally applied as a non-ionic emulsifier for cosmetic O/W emulsions and HCI applications.

Show details
Formamide

It is a clear liquid which is miscible with water and has an ammonia-like odor. It is chemical feedstock for the manufacture of sulfa drugs, other pharmaceuticals, herbicides, pesticides and the manufacture of hydrocyanic acid.

Show details
Formic Acid 85%Show details
Formic Acid 90%Show details
Formic Acid 95%Show details
Formic acid 99-100%Show details
Glucopon 215 UP

Short chain APG surfactant has moderate hydrotrope ability and high foam with good primary cleaning. Primary function is a mild.Degreaser and a foaming/stabilizing surfactant.It won’t damage even floor finishes (institutional cleaning and sanitation, food & beverage processing, vehicle & transporation care).

Show details
Glucopon 225 DK

Short chain APG surfactant has excellent hydrotrope ability and high foam with good primary cleaning. Has excellent gloss retention (low to no streak) and excellent plastic compatibility.

Show details
Glucopon 420 UP

Stable at high alkaline conditions, has excellent wetting. Has high foam and so may need a defoamer. Listed on safer choice (food and beverage processing). Mid-chain APG surfactant has moderate hydrotrope ability and high foam with good primary cleaning. Primary function is a mild degreaser and a foaming/stabilizing surfactant. It won’t damage even floor finishes (institutional cleaning and sanitation, food & beverage processing, vehicle & transporation care, food service & kitchen hygiene).

Show details
Glucopon 420 UP/MB

Glucopon® 420 UP has the wetting, penetrating and detergency properties desired for hard surface cleaning products designed to clean surfaces, such as glass, ceramic, plastic and metal. In liquid hard surface cleaners, Glucopon® 420 UP acts as a hydrotrope to solubilize other ingredients. Further hard surface cleaning benefits are non-streaking, non-filming and non-stress cracking of cleaned surfaces, as well as low toxicity.

Show details
Glucopon 425N

Mid-chain APG surfactant has moderate hydrotrope ability and high foam with good primary cleaning. Has excellent gloss retention (low to no streak), stable at high alkaline conditions and excellent option for wetting (institutional cleaning and sanitation, food & beverage processing, vehicle & transporation care).

Show details
Glucopon 50 G

Is an alkyl polyglycoside on inorganic and organic carrier. This product is a granular APG® for the detergent and cleaner market. The manufacturing of this product is based on fluidized bed technology and the resulting granule structure allows the smooth addition of Glucopon 50 G into laundry powders or tablets, cleaner blocks, and automatic dishwashing detergents in tablet or powder form.

Show details
Glucopon 600 UP

Long chain APG surfactant. Primary function as a mild Degreaser and a foaming/stabilizing surfactant. Works in combination with fatty soap for this application (food and beverage processing, food service and kitchen hygiene).

Show details
Glucopon 625 UP

Long chain APG surfactant. Primary function as a mild Degreaser and a foaming/stabilizing surfactant. Works in combination with fatty soap for this application (institutional cleaning and sanitation, food & beverage processing, food service & kitchen hygiene).

Show details
Glyoxal 40%Show details
Industrol 4141Show details
Industrol DF 204Show details
Inoterra DWE

Optimized blend that uses the advantage of synergy between natural alcohol ethoxylates and 2-PH surfactants.
Presence of water provides the advantage of better phase stability

Show details
InoterraDWF

Optimized blend that uses the advantage of synergy between natural alcohol ethoxylates and 2-PH surfactants. Presence of water provides the advantage of better phase stability.

Show details
Irgasan DP 300Show details
Isophorone Diamine (IPDA)Show details
IsopropanolamineShow details
Iwp 261

Isocyanate terminated polypropylene glycol prepolymer based on dicyclohexylmethane 4,4’ diisocyanate (HMDI) for use in cast elastomers such as tooling resins and decorative applications. Processable at room temperature, ELASTOCAST TIWP261 is clear, light stable with high hardness capabilities. As with all polyurethane products, application and field testing are necessary to determine suitability of the selected product or product combination for each specific application.

Show details
Kerocom™FM 38

Kerocom® FM-38 is a derivative of hydrocarbon acids and alkanol amides. It is a gasoline additive component designed to reduce friction, reduce emissions, and improve fuel economy in automotive spark ignition vehicles.

Show details
Keropur™ AP 205-20

KEROPU AP-205-20 additive is a multipurpose synthetic detergent
package that efficiently removes and controls vehicle intake system
deposits.

Show details
Klearfac AA 270Show details
Kollisolv PEG 1000Show details
Korantin BHShow details
Korantin MAT

Recommended for neutral to alkaline conditions. Soluble in alcohols and dilute caustic solutions (i.e. 10% soluble in 5% caustic solution) (vehicle and transportation care, food and beverage processing).

Show details
Korantin PM

Recommended for acidic conditions. Excellent protection in acidic media, especially HCl. High stability in peracidic media. Low hydrogen-induced embrittlement of steel.

Show details
Korantin PP

Recommended for acidic conditions. Excellent protection in acidic media, especially HCl. High stability in peracidic media. Low hydrogen-induced embrittlement of steel.

Show details
Larostat 264

Anhydrous anti stat

Show details
Loxanol® CA 5310

Emission Free Coalescent was developed for coatings formulations with less than 50 g/l VOC. It is produced from renewable raw materials and can replace traditional VOC contributing coalescent.

Show details
Lupasol FG

Is a clear, colorless cationic polyethylenimine with a branched polymer structure. It is an excellent crosslinker to a variety of polymers and organic chemicals. It is also an excellent adhesion promoter that can be used in wood laminates, cement, and bricks.

Show details
Lupasol FT

Is a multi-functional cationic polyethyleneimine (PEI) with a branched polymer structure. The unique properties of Lupasols allow them to promote adhesion, disperse fillers and pigments, flocculate suspended solids, enhance and modify surface characteristics, protect materials after surface modification and bind unwanted materials.

Show details
Lupasol G 100Show details
Lupasol G 20

Is a branched aqueous solution of low molecular weight polyethylenimine with 50% concentration and a low molecular weight of 1,300. It is typically used as an adhesion promoter and chelating agent.

Show details
Lupasol HFShow details
Lupasol P

Is a multi-functional cationic polyethyleneimine (PEI) with a branched polymer structure. The unique properties of Lupasols allow them to promote adhesion, disperse fillers and pigments, flocculate suspended solids, enhance and modify surface characteristics, protect materials after surface modification and bind unwanted materials.

Show details
Lupasol PR 8515

Is a water-free polyethylenimine with a low molecular weight of 2,000. It provides excellent adhesion promoting and chemical chelation properties to a variety of compounds such as oxides, halides, and heavy metals.

Show details
Lupasol PS

Is a branched aqueous solution of polyethylenimine with 33% concentration and a molecular weight of 750,000. It is typically used as a paper strength aid and flocculating agent for fine fibers.

Show details
Lupasol SC 61BShow details
Lupasol WF

Is a branched water-free polyethylenimine with a medium molecular weight of 25,000. It is typically used as an adhesion promoter, oxides scavenger, and fixing agent.

Show details
Lurtropur MSA 100Show details
Lutensol A 12 NShow details
Lutensol A 65 N

Is a 100% active nonionic surfactant composed of a seven mole ethylene oxide adduct of a linear lauryl myristyl alcohol. Lutensol A 65 N Surfactant has excellent detergency and excellent wetting power, and is a moderate foamer.

Show details
Lutensol A 9 N

Is a 100% active nonionic surfactant composed of a nine mole ethylene oxide adduct of a linear lauryl myristyl alcohol. Lutensol A 9 N Surfactant has excellent detergency and excellent wetting power, and is a moderate foamer.

Show details
Lutensol AO 11

The Lutensol AO types with a medium-to-high degree of ethoxylation are char

Show details
Lutensol AO 3

The Lutensol AO types with a medium-to-high degree of ethoxylation are char

Show details
Lutensol AO 7

The Lutensol AO types with a medium-to-high degree of ethoxylation are char

Show details
Lutensol AO 8

The Lutensol AO types with a medium-to-high degree of ethoxylation are char

Show details
Lutensol AT 25 FLShow details
Lutensol AT 25 PowderShow details
Lutensol AT 80 FLShow details
Lutensol AT 80 PowderShow details
Lutensol CS 6250Show details
Lutensol FT TO 5Show details
Lutensol FT TO 8Show details
Lutensol FT TO 89Show details
Lutensol FT XP 89Show details
Lutensol ON 60Show details
Lutensol OP 10

Is a water-soluble nonionic surfactant composed of a 10-mole ethylene oxide adduct of octylphenol. Can be used as emulsifier, wetting agent, dispersant, synthetic latex stabilizer and detergent in formulating cleaning products.

Show details
Lutensol OP 40 70%

Is a water-soluble nonionic surfactant composed of a 40-mole ethylene oxide adduct of octylphenol. Can be used as emulsifier, wetting agent, dispersant, synthetic latex stabilizer and detergent in formulating cleaning products.

Show details
Lutensol TDA 10

Is an ethoxylated tridecyl alcohol. It has excellent rapid wetting properties, relatively low foaming levels, good detergency and versatility as an emulsifier, dispersant, and solubilizer.

Show details
Lutensol TDA 3

Is a 100% active nonionic surfactant composed of a 3-mole ethylene oxide adduct of tridecyl alcohol. Lutensol TDA surfactants are ethoxylated tridecyl alcohols. Members of this surfactant series show excellent rapid wetting properties, relatively low foaming levels and good detergency and versatility as emulsifiers, dispersants and solubilizers.

Show details
Lutensol TDA 6

Is a 100% active nonionic surfactant composed of a 6-mole ethylene oxide adduct of tridecyl alcohol. Lutensol TDA surfactants are ethoxylated tridecyl alcohols. Members of this surfactant series show excellent rapid wetting properties, relatively low foaming levels and good detergency and versatility as emulsifiers, dispersants and solubilizers.

Show details
Lutensol TDA 8

Is a 100% active nonionic surfactant composed of an 8-mole ethylene oxide adduct of tridecyl alcohol. Lutensol TDA surfactants are ethoxylated tridecyl alcohols. Members of this surfactant series show excellent rapid wetting properties, relatively low foaming levels and good detergency and versatility as emulsifiers, dispersants and solubilizers.

Show details
Lutensol TDA 8 90%

Is a 90% active nonionic surfactant composed of an 8-mole ethylene oxide adduct of tridecyl alcohol. Lutensol TDA surfactants are ethoxylated tridecyl alcohols.

Show details
Lutensol TDA 9

Is a 100% active nonionic surfactant composed of a 9-mole ethylene oxide adduct of tridecyl alcohol. Lutensol TDA surfactants are ethoxylated tridecyl alcohols. Members of this surfactant series show excellent rapid wetting properties, relatively low foaming levels and good detergency and versatility as emulsifiers, dispersants and solubilizers.

Show details
Lutensol TO 5

Is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible.

Show details
Lutensol TO 6

Is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible.

Show details
Lutensol TO 65

Is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible.

Show details
Lutensol TO 8

Is a non-ionic surfactant based on a saturated iso-C13 alcohol. Exhibits excellent surface activity, outstanding wetting action and good emulsifying properties. Lutensol® TO 8 can be used as an alternative to alkylphenol ethoxylates.

Show details
LUTENSOL TO 89

Is C13 oxo alcohol ethoxylate. Acts as a wetting agent. Exhibits excellent surface activity and good emulsifying properties. Lutensol® TO 89 is designed for coatings applications.

Show details
Lutensol XL 100

Is a nonionic surfactant, this is an alkyl polyethylene glycol ether made from a C10-Guerbet Alcohol and ethylene oxide. This contains also higher alkylene oxide in small amounts.

Show details
Lutensol XL 40

Is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 40 is a clear to cloudy liquid at room temperature, and it tends to form a sediment.

Show details
Lutensol XL 70Show details
Lutensol XL 79Show details
Lutensol XL 80

Is a nonionic surfactant, this is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. Manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions.

Show details
Lutensol XL 90Show details
Lutensol XP 30Show details
Lutensol XP 40Show details
Lutensol XP 50Show details
Lutensol XP 79

Is a nonionic surfactant, this is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. Manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions.

Show details
Lutensol XP 80Show details
Lutensol XP 89

Is a nonionic surfactant, this is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. Manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions.

Show details
Lutensol XP 90

Will improve the wetting and boost the degreasing power of a foam cleaner. It has very fast dynamics and excellent detergency on oily soils.

Show details
Lutropur MShow details
Lutropur MSA

Less corrosive strong acid, exhibiting a low vapor pressure and high dissolving capacity on many scales.
Lutropur® MSA has synergy with certain acids and also Trilon® M (Chelating agent) on many scales (food service and kitchen hygiene, food and beverage processing, institutional cleaning and sanitation, vehicle transportation and care).
Excellent product for dye/pigment type soil.
High purity, less corrosive strong acid, exhibiting and a low vapor pressure (commerical laundry, food and beverage processing)

Show details
Mapeg 400 MO

Polyethylene Glycol Esters are available in graduated hydrophilic to lipophilic surface-active properties. The lower molecular weight esters are oil soluble, and in non-aqueous systems, influence stability, viscosity, wetting, absorption, foaming and other physical properties.

Show details
Mapeg 600 DO FG

Polyethylene Glycol Esters are available in graduated hydrophilic to lipophilic surface-active properties. The lower molecular weight esters are oil soluble, and in non-aqueous systems, influence stability, viscosity, wetting, absorption, foaming and other physical properties.

Show details
Mapeg 600 DOT

Polyethylene Glycol Esters are available in graduated hydrophilic to lipophilic surface-active properties. The lower molecular weight esters are oil soluble, and in non-aqueous systems, influence stability, viscosity, wetting, absorption, foaming and other physical properties.

Show details
Mapeg S-40 K Flake

Polyethylene Glycol Esters are available in graduated hydrophilic to lipophilic surface-active properties. The lower molecular weight esters are oil soluble, and in non-aqueous systems, influence stability, viscosity, wetting, absorption, foaming and other physical properties.

Show details
Mazol 300 KShow details
Mazol PGO 31KShow details
MethyldiethanolamineShow details
N-(2-Aminoethyl)ethanolamineShow details
N-(2-HYDROXYETHYL)-2-PYRROLIDONEShow details
N-EthyldiisopropylamineShow details
N-ETHYLPYRROLIDONE-2Show details
N-MethyldiethanolamineShow details
N-MethylpyrrolidoneShow details
N-Octyl-2-pyrrolidoneShow details
N-OctylamineShow details
N-Vinyl-2-pyrrolidoneShow details
N,N-DimethylacetamideShow details
N,N-DimethylethanolamineShow details
N,N-DimethylformamideShow details
N,N-DimethylisopropanolamineShow details
N,N'-Dimethyl ureaShow details
Neol NeopentylglycolShow details
Plantapon 611 L UP

Synergistic blend of surfactants that provides good cleaning and mild to skin

Show details
Plantatex HCC

Provides Fabric Rejuvenation.

Show details
Plantatex LLE

Plantatex® LLE is a viscous composite based on nonionic surfactants and lipid layer enhancers that is used as a laundry additive for developing mild, sensitive fabric care products. Also, Lipid Layer Enhancer for Skin Care.

Show details
Plurafac CS 10

Low foaming anionic surfactant with high temperature stability and great caustic solubility (up to 35% NaOH and 50% KOH solution). Highly recommended for bleach free alkaline CIP cleaners or any low foaming formulation.

Show details
Plurafac D 25Show details
Plurafac FT LF 400Show details
Plurafac LF 120

Low foaming surfactant. Has a cleaning and synergy with Dehypon® LS 36, which can lower the foam behavior as well.

Show details
Plurafac LF 221

Low foaming surfactant. Can be readily incorporated in highly acidic cleaners. Suitable for low temperature cleaning (less than or equal to 45°C).

Show details
Plurafac LF 224Show details
Plurafac LF 303

Is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 350 mPa·s at 23°C.

Show details
Plurafac LF 400

Low foaming surfactant. Provides excellent spotting and filming performance.

Show details
Plurafac LF 403

Provides excellent foam control for Glucopon® surfactant and Deriphat® 160 C.

Show details
Plurafac LF 431

Is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 45 mPa·s at 23°C.

Show details
Plurafac LF 500

Is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 65 mPa·s at 23°C.

Show details
Plurafac LF 900

Provides excellent foam control and good wetting.

Show details
Plurafac RA 300

A variety of these products are excellent detergents for household and industrial use in cleaning applications. In addition to their cleaning properties (wetting, emulsification, high temperature stability and dispersion), alcohol alkoxylates can be used in combination with standard anionic, nonionic or cationic ingredients to solve foaming problems when high mechanical energy cleaning procedures are used

Show details
Plurafac RCS 43Show details
Plurafac S305-LF

Excellent alkali and acid stability. Low foaming and high detergency. Ideally suited for metal cleaninig, mechanical dishwashing, and rinse aids.

Show details
Plurafac S405-LF

Alkoxylated linear alcohol designed specifically for low foaming applications such as mechanical dishwashing, metal cleaning, dairy equipment cleaning and pulp and paper additives. Compatible with anionic, cationic, and other nonionic surfactants.

Show details
Plurafac S505-LFShow details
Plurafac SL-62

Moderately low foaming surfactant. Suitable for high temperature cleaning (greater than 60°C)

Show details
Plurafac SLF-180

Low foaming surfactant. Suitable for low temperature cleaning (Less than or equal to 45°C) (food and beverage processing). Very good synergy with Pluronic N3 specially when used as a rinse aid in low temperature warewash machines (food services and kitchen hygiene).

Show details
Plurfac LF 220Show details
Pluriol E 1000 LS

Used as a base for certain preparations, as a thickening agen, as a suspending agent, and as a binder. When esterified with fatty acid, it is also used as an emulsifying agent.

Show details
Pluriol E 1450 PrillShow details
Pluriol E 1450N NF

Polyethylene glycols (PEGs) conforming to the current NF monograph

Show details
Pluriol E 200 LS

Polyethylene glycol that is 100% active. It is a clear, odorless, almost colorless, viscous liquid. Pluriol® E 400 LS is heat stable and hygroscopic and has a low vapor pressure. It is soluble in water, acetone, ethanol, ethyl acetate and toluene

Show details
Pluriol E 300

Polyethylene glycol that is 100% active. It is a clear, odorless, almost colorless, viscous liquid. Pluriol® E 400 LS is heat stable and hygroscopic and has a low vapor pressure. It is soluble in water, acetone, ethanol, ethyl acetate and toluene

Show details
Pluriol E 300 NF

Polyethylene glycols (PEGs) conforming to the current NF monograph

Show details
Pluriol E 3350 Flake

Polyethylene glycols can be used as thickeners, lubricants, mold release agents, defoaming agents, softeners, conditioners, antistats, sizing agents and dispersants. They can also be used to make chemical intermediates such as fatty acid esters, and as grain refining agents in inks.

Show details
Pluriol E 3350 NF PrillShow details
Pluriol E 4000 Prill

Polyethylene Glycol.

Show details
Pluriol E 400LS

Pluriol® E 400 LS is a polyethylene glycol that is 100% active. It is a clear, odorless, almost colorless, viscous liquid. Pluriol® E 400 LS is heat stable and hygroscopic and has a low vapor pressure. It is soluble in water, acetone, ethanol, ethyl acetate and toluene

Show details
Pluriol E 600 LS

Polyethylene Glycols

Show details
Pluriol E 8000 FL

Can be employed as a solubilizer, lubricant, dispersant, mold release agent in a variety of applications. I can also be used to modify the viscosity of liquids and can be used as heat transfer and hydraulic fluid. Polyether diols are also used as intermediates in organic synthesis.

Show details
Pluriol E 8000 Prill

Polyethylene Glycol. Binder for tablets and pastilles

Show details
Pluriol V 10

Excellent film forming properties and chemical and shear stability. Non-corrosive and non-foaming. Good lubricating action, is not affected by hydrolysis, bacteria, oxidation or heat under normal storage conditions.

Show details
Pluriol WS 5100

Used in metalworking fluids. Better lubricity, wetting, detergency, resistance to bacterial and chemical deterioration, and excellent operation visibility as a result of transparent solutions over mineral oils.

Show details
Pluriol WSBShow details
Pluroinc P 84Show details
Pluronic 10R5

Pluronic 10R5 is a powerful defoamer and has reduced gelling tendencies.

Show details
Pluronic 17R2

Low foaming surfactant (food and beverage processing). Suitable for machine floor cleaning as an foam controlling agent (food beverage processing, institutional cleaning and sanitation).

Show details
Pluronic 17R4

Is a difunctional block copolymer surfactant with terminal secondary hydroxyl groups. A nonionic surfactant that is 100% active and relatively non-toxic.

Show details
Pluronic 25R2

Is a difunctional block copolymer surfactant with terminal secondary hydroxyl groups. It is a nonionic surfactant that is 100% active and relatively nontoxic.

Show details
Pluronic 25R4

Pluronic 25R4 is a difunctional block copolymer surfactant
with terminal secondary hydroxyl groups. A nonionic
surfactant that is 100% active and relatively nontoxic.

Show details
Pluronic 31R1

Provides very good defoaming (food and beverage processing, food service and kitchen hygiene). Suitable for machine floor cleaning as an excellent foam controlling agent (instiutional cleaning and sanitation.

Show details
Pluronic F 108 Prill

Is a synthetic copolymer of ethylene oxide and propylene oxide with an average molecular weight 14600. Considered for it’s general functionality as a surfactant, emulsifier, solubilizer and stabilizer in preparations where the quality of poloxamer as prescribed in the current NF may be required.

Show details
Pluronic F 68 Prill

A difunctional block copolymer surfactant terminating in primary hydroxyl groups. A nonionic surfactant that is 100% active and relatively nontoxic. Company. BASF Home Care and Industrial and Institutional Ingredients is one of the leading suppliers in the Home Care, Industrial, and Institutional Cleaning industry.

Show details
Pluronic F 77 PrillShow details
Pluronic F 87 Prill

A difunctional block copolymer surfactant terminating in primary hydroxyl groups. A nonionic surfactant that is 100% active and relatively nontoxic. Company. BASF Home Care and Industrial and Institutional Ingredients is one of the leading suppliers in the Home Care, Industrial, and Institutional Cleaning industry.

Show details
Pluronic F 88 PrillShow details
Pluronic F 98 Prill Surf

A difunctional block copolymer surfactant terminating in primary hydroxyl groups. A nonionic surfactant that is 100% active and relatively nontoxic. Company. BASF Home Care and Industrial and Institutional Ingredients is one of the leading suppliers in the Home Care, Industrial, and Institutional Cleaning industry.

Show details
Pluronic F88 PastilleShow details
Pluronic F98 PastilleShow details
Pluronic FT L 61Show details
Pluronic L 10

A difunctional block copolymer surfactant terminating in primary hydroxyl groups. A nonionic surfactant that is 100% active and relatively nontoxic. Company. BASF Home Care and Industrial and Institutional Ingredients is one of the leading suppliers in the Home Care, Industrial, and Institutional Cleaning industry.

Show details
Pluronic L 101

Is a difunctional block copolymer surfactant terminating in primary hydroxyl groups. A nonionic surfactant that is 100% active. Pluronic® L101 is a difunctional block copolymer surfactant terminating in primary hydroxyl groups. A nonionic surfactant that is 100% active.

Show details
Pluronic L 121Show details
Pluronic L 31

A difunctional block copolymer surfactant terminating in primary hydroxyl groups. A nonionic surfactant that is 100% active and relatively nontoxic.

Show details
Pluronic L 35

A difunctional block copolymer surfactant terminating in primary hydroxyl groups. A nonionic surfactant that is 100% active and relatively nontoxic.

Show details
Pluronic L 43

Is a difunctional block copolymer surfactant terminating in primary hydroxyl groups. It is a nonionic surfactant that is 100% active and relatively nontoxic. Company. BASF is one of the leading suppliers in the Home Care, Industrial, and Institutional Cleaning industry.

Show details
Pluronic L 44 INH

Is a difunctional block copolymer surfactant terminating in primary hydroxyl groups. A nonionic surfactant that is 100% active and relatively nontoxic. This product is inhibited with 100 ppm DL-alpha-Tocopherol.

Show details
Pluronic L 61

Suitable for low temperature commercial dishwashing machines. Provides good defoaming and wetting. Final surfactant choice will be formulation dependent as well as temperature of cleaning process. Suitable for low temperature commercial dishwashing machines. Suitable for machine floor cleaning as a foam controlling agent.

Show details
Pluronic L 62

Low foaming surfactant (food and beverage processing). Suitable for high temperature commercial dishwashing machines (food service and kitchen hygiene, vehicle and transportation care).

Show details
Pluronic L 62 LF

Suitable for both high and low temperature commercial dishwashing machines. Final surfactant choice is formulation dependent.

Show details
Pluronic L 64

Is a difunctional block copolymer surfactant terminating in primary hydroxyl groups. A nonionic surfactant that is 100% active and relatively nontoxic.

Show details
Pluronic L 81

Suitable for low temperature commercial dishwashing machines. Provides good defoaming and wetting (food service and kitchen hygiene) Low foaming surfactant).

Show details
Pluronic L 92

Is a difunctional block copolymer surfactant terminating in primary hydroxyl groups. It is a nonionic surfactant that is 100% active and relatively nontoxic. Company. BASF is one of the leading suppliers in the Home Care, Industrial, and Institutional Cleaning industry.

Show details
Pluronic N 3

Suitable for low temperature commercial dishwashing machines. Provides excellent defoaming and wetting. Has very good synergy with Plurafac SLF 180, specially when used as a rinse aid in a low temperature dishwashing machines. Final surfactant choice is formulation dependent (food service and kitchen hygiene). Final surfactant choice will be formulation dependent as well as temperature of cleaning process (food and beverage processing).

Show details
Pluronic P 103Show details
Pluronic P 123Show details
Pluronic P 65Show details
Pluronic P104

Difunctional block copolymer surfactant terminating in primary hydroxyl groups. A nonionic surfactant that is 100% active and relatively nontoxic.

Show details
Pluronic P105

Difunctional block copolymer surfactant terminating in primary hydroxyl groups. A nonionic surfactant that is 100% active and relatively nontoxic.

Show details
Propargyl alcohol highly conc.Show details
Propionic acid pureShow details
PropylamineShow details
Propylene carbonateShow details
Pyrrolidine PureShow details
S-Maz 60K

Lipophilic emulsifier and coupling agent in textile, household, and institutional industries.

Show details
S-Maz 65KShow details
S-Maz 80K

Lipophilic emulsifier and coupling agent in textile, household, and institutional industries.

Show details
Sokalan CP 10

Is a modified Polyacrylic acid. Polymeric Dispersing Agents have the potential to inhibit incrustation and scale formation. This is a result of their ability to disperse suspended solids. Sokalan® CP 10 boosts detergency overcoming deficiencies seen when phosphates are removed from formulations.

Show details
Sokalan CP 10 SShow details
Sokalan CP 12 S

Is particularly effective for inhibiting scale for med by calcium and magnesium salts. It is mainly used in institutional laundr y detergents that contain high proportions of sodium carbonate. It is also used to disperse pigments, fillers and other finely divided inor ganic solids in water and in cooling circuits, etc.

Show details
Sokalan CP 2695Show details
Sokalan CP 42Show details
Sokalan CP 5

Is a polymeric Dispersing agent with the potential to inhibit incrustation and scale formation, as a result of their ability to disperse suspended solids. Additionally, Sokalan CP 5 boosts detergency overcoming deficiencies seen when phosphates are removed from formulations. This can be demonstrated by the increase in whiteness when Sokalan is added to a formulation.

Show details
Sokalan CP 5 Gran

Polymeric Dispersing Agents have the potential to inhibit incrustation and scale formation.
This is a result of their ability to disperse suspended solids.
Boosts detergency overcoming deficiencies seen when phosphates are removed from formulations

Show details
Sokalan CP 6340Show details
Sokalan CP 7

Is a copolymer of Metaclic acid and acrylic acid. Polymeric Dispersing Agents have the potential to inhibit incrustation and scale formation. This is a result of its ability to disperse suspended solids. Sokalan® CP 7 boosts detergency overcoming deficiencies seen when phosphates are removed from formulations.

Show details
Sokalan CP 9Show details
Sokalan DCS

Recommended for solid/powder formulations

Show details
Sokalan HP 165Show details
Sokalan HP 20

Multifunctional polymer, Boosts the detergency of LAS. Reduces clay re-deposition. Improves detergency on oxidizable stains. Effective at moderate pH.

Show details
Sokalan HP 22 G

Useful as an Anti-graying polymer for polyester.

Show details
Sokalan HP 50

Is 95% active Polyvinylpyrrolidone, containing approximately 360 monomer units. Because of the permanent dipole structure, Sokalan HP50 polymer will complex polarizable and acidic compounds, including hydrogen peroxide. It finds use in detergents as an anti-redeposition agent (especially on carbonaceous soil) and as an anti-dye transfer agent, where it complexes and solubilizes vagrant dyes keeping clothes more color-pure.

Show details
Sokalan HP 56K

Is a 97% active Vinylpyrrolidone/Vinylimidazole copolymer in granule format used to prevent bleeding dyes from staining other garments in the wash. A polymer that when used in high-performance detergents, acts as a dye transfer inhibitor to grab the released dye molecules of colored textiles to prevent for redeposition on other fabrics.

Show details
Sokalan HP 66K

Is a special modified polymer that prevents bleeding dyes from staining other garments. It thereby contributes significantly to the development of high-performance color detergents. It offers an excellent cost/benefit ratio in detergent formulations.

Show details
Sokalan K 17 PShow details
Sokalan K 30 PShow details
Sokalan K 90 PShow details
Sokalan PA 25 CLShow details
Sokalan PA 30 CLShow details
Sokalan PA 30 CL Gran

Anti-redepostiion, particulate dispersion, and surface modification

Show details
Sokalan PA 40Show details
Sokalan VA 64Show details
Soklan K 30 sol. 30%Show details
T-Maz 20

It can be used as a solubilizer and emulsifier of oils and fragrances, as a wetting agenst, viscosity modifier, anti-stat, stabilizer, and dispersing agent. It can also be used in the textile and metalworking industries.

Show details
T-Maz 28Show details
T-Maz 60K

T-Maz® 60K can be used as a solubilizer and emulsifier of oils and fragrances, wetting agent, viscosity modifier, antistat, stabilizer or dispersing agent. T-Maz® surfactants can also be used in the food, textile, and metalworking industries. Food applications include ice cream, shortening and edible oils, yeast defoamers, pickle products, vitamins and mineral preparations, whipped vegetable toppings, gelatin dessert mixes, defoamers in cottage cheese, and artificial colors in barbecue sauce.

Show details
T-Maz 65K

T-Maz® 65K can be used as a solubilizer and emulsifier of oils and fragrances, wetting agent, viscosity modifier, antistat, stabilizer or dispersing agent. T-Maz® surfactants can also be used in the food, textile, and metalworking industries. Food applications include ice cream, shortening and edible oils, yeast defoamers, pickle products, vitamins and mineral preparations, whipped vegetable toppings, gelatin dessert mixes, defoamers in cottage cheese, and artificial colors in barbecue sauce.

Show details
T-Maz 80K

T-Maz® 80K can be used as a solubilizer and emulsifier of oils and fragrances, wetting agent, viscosity modifier, antistat, stabilizer or dispersing agent. T-Maz® surfactants can also be used in the food, textile, and metalworking industries. Food applications include ice cream, shortening and edible oils, yeast defoamers, pickle products, vitamins and mineral preparations, whipped vegetable toppings, gelatin dessert mixes, defoamers in cottage cheese, and artificial colors in barbecue sauce.

Show details
T-Maz 85 KShow details
tert.-Amyl alcoholShow details
tert.-ButylamineShow details
Tetrahydrofuran (THF)Show details
Tetrasodium EDTA 40% SolutionShow details
Tetronic 1107 PrillShow details
Tetronic 1301Show details
Tetronic 150R1

This hydrophobic block co-polymer is useful for foam control.

Show details
Tetronic 701

Tetronic 701 is a tetrafunctional block copolymer surfactant terminating in primary hydroxyl groups.

Show details
Tetronic 901

Tetronic 901 is a tetrafunctional block copolymer surfactant terminating in primary hydroxyl groups.

Show details
Tetronic 904Show details
Tetronic 908 Prill

Tetronic 908 Prill is a tetrafunctional block copolymer surfactant terminating in primary hydroxyl groups.

Show details
Tetronic 90R4Show details
Tinopal CBS-XShow details
TributylamineShow details
TriethylamineShow details
Triethyleneglycol Divinyl EtherShow details
TriisopropanolamineShow details
Trilon B Powder

They are used to soften water and to remove alkaline earth and heavy metal impurities. They are often incorporated in detergents and cleaners for household and industrial uses.

Show details
Trilon BAD Liq.Show details
Trilon BAQ Liquid

USed to descale equipment in eletric, chemical processing, refineries, and othe industrial plants. Easier, safer, and less corrosive alternative to mineral and organic acids. Can be used in stainless steel passivation

Show details
Trilon BD Chelate

They are used to soften water and to remove alkaline earth and heavy metal impurities. They are often incorporated in detergents and cleaners for household and industrial uses.

Show details
Trilon BS Powder

They are used to soften water and to remove alkaline earth and heavy metal impurities. They are often incorporated in detergents and cleaners for household and industrial uses.

Show details
Trilon BX Liquid

They are used to soften water and to remove alkaline earth and heavy metal impurities. They are often incorporated in detergents and cleaners for household and industrial uses.

Show details
Trilon BX Powder

They are used to soften water and to remove alkaline earth and heavy metal impurities. They are often incorporated in detergents and cleaners for household and industrial uses.

Show details
Trilon C Liquid

Used to sequester free metal ions in aqueous systems. They are used to soften water and to remove traces of alkaline earth and heavy metals

Show details
Trilon D Liquid

TRILON D liquid is an aqueous solution of trisodium hy-droxyethylethylenediaminetriaacetate (Na3HEDTA). It forms stable complexes with trivalent iron in the 2-10 pH range. Solu-tions of Trilon D Liquid are more resistant to precipitation in the presence of acids and alkalis than other chelating agents.

Show details
Trilon M Gran SG

Non-toxic and biodegradable alternative to phosphates and other chelating agensts such as EDTA, NTA, and citrate. A aquesous solution of the trisodium salt of methylglycinediacetic acid.

Show details
Trilon M Liquid

Non-toxic and biodegradable alternative to phosphates and other chelating agensts such as EDTA, NTA, and citrate. A aquesous solution of the trisodium salt of methylglycinediacetic acid.

Show details
Trilon M Liquid T

Non-toxic and biodegradable alternative to phosphates and other chelating agensts such as EDTA, NTA, and citrate. A aquesous solution of the trisodium salt of methylglycinediacetic acid.

Show details
Trilon NA

TRILON FOOD GRADE CHELATING AGENTS are designed to control trace metal ions which may be responsible for catalyzing discoloration, oxidation, turbidity, corrosion, texture deterioration, the development of off-flavor and rancidity, or other deteriorative changes in food and beverage products during processing or storage.

Show details
Triphenyl Phosphine PelletsShow details

8601 – 95th Street, Pleasant Prairie, WI 53158 - (P) 262-427-0400 (F): 262-947-0075

© 2019 EMCO Chemical Distributors, Inc. All rights reserved.

Terms and Conditions of Sale | Privacy Policy

Designed by Windy City Web Designs | Strategies